Rounding the Windward Mark
Short answer: Plan your approach well before the mark. Don’t overstand the layline, and allow for current. If you approach on port in a crowd, tack before the three-length zone so you don’t foul a starboard boat. Use the layline to get ready for the next leg, then bear away around the mark by flattening the boat and easing the main rather than relying on the rudder.
Sailors put a lot of thought into the start and the first beat, but a clean windward mark rounding can gain you just as many places. The goal is simple: get to the mark without sailing extra distance or fouling anyone, and leave it ready for the next leg.
Know where the mark is
Check where the windward mark is before the start, and keep checking as you sail up the beat. You can’t judge the laylines if you’ve lost sight of the mark.
Get the layline right
If you go past the layline, you sail extra distance and leave room for another boat to tack below you and still make the mark. Tack as close to the layline as you can. In current, remember that the tide will push you towards or away from the mark, and adjust your layline.
Approaching on port tack
Coming in on port in a busy fleet is risky. If you tack inside the three-length zone, you mustn’t make a starboard boat sail above close-hauled to avoid you. To stay out of trouble, tack three or four boat lengths short of the layline, outside the zone, or cross the starboard boats completely before you tack. Rounding one place behind is better than a penalty turn.
If you realise you’re not going to make the mark, tack away early and set up again. Hitting the mark or having to gybe round at the last second costs far more.
Approaching on starboard tack
Protect your lane on the layline. If a port boat is coming to tack under your bow, foot off slightly early, so that when they tack you can head up and keep clear air.
Prepare on the layline
While you’re sailing fast up the layline, get ready for the next leg. Make sure the mainsheet runs freely, get the gennaker or spinnaker ready, and decide your plan: will you go high or low on the reach, or gybe soon after rounding?
Bear away with the boat, not the rudder
Don’t sit up and relax when you reach the mark. Hike hard to keep the boat flat, or even slightly heeled to windward, ease the main quickly and keep the jib a touch overtrimmed. This turns the boat with very little rudder. Some boats with small rudders simply won’t bear away if they’re heeled.
Mark-room in brief
If boats on the same tack are overlapped when the first of them reaches the zone, the inside boat is entitled to mark-room, which can include heading up to round. The outside boat must give that room, so don’t bear away early. If you tack inside the zone, you’re the boat at risk. The simplest rule of thumb is to finish your tacks before you enter the zone.
FAQ
What is the zone at a mark?
The area within three hull lengths of the mark. Several mark-room rules apply only once boats are inside it.
Can I tack at the windward mark?
You can, but if you tack inside the zone you must not make a starboard boat that has been in the zone sail above close-hauled to avoid you. It’s safest to finish your tack before you enter the zone.
How do I bear away quickly around the windward mark?
Keep the boat flat or slightly heeled to windward, ease the mainsheet quickly and keep the jib slightly overtrimmed. The boat turns with very little rudder, so you keep your speed.
Mark roundings are part of our keelboat race training in False Bay and dinghy race training at Theewater.







